Quality is everything

Focus on electricity for 15 years

 Ceramic Heater Core

Member of Yuling company

Home    10mm 110V 150W Coil Spring Heater Enail Heating Element
DSCN1365
DSCN1364
DSCN1363
DSCN1362

10mm 110V 150W Coil Spring Heater Enail Heating Element

DSCN1365

10mm 110V 150W Coil Spring Heater Enail Heating Element features continuous operating temperatures up to 1200°F. Rapid heating and cooling occur, due to the low mass construction. All heating elements are sealed from contamination and the stainless steel sheath provides maximum corrosion resistance. An optional internal thermocouple may be utilized for precise control.  Its high working temperature, fast heating, uniform heating precision, long service life, can be automatically controlled area, high thermal conduction, while internal heating material damage, external can be reuses.

  

Features of 10mm 110V 150W Coil Spring Heater Enail Heating Element:

Standard sheath material: ..................................Ni-Cr steel, for temperatures up to 1500° (815°)

Standard thermocouple: .....................................ANSI Type J

Optional thermocouple: ......................................ANSI Type K

Minimum bending radius: ..................................Three times the sheath diameter

Dimensional:

Standard square cable: .......................................0.125" square

Standard rectangle cable: ...................................0.080" x 0.140", 0.105" x 0.150"

Standard round cable diameters: ......................0.093", 0.125", 0.150", 0.188", 0.200", 0.250", 0.312", 0.375" - Other dimensions available

Cable diameter tolerance: ...................................±0.005

Standard potting adapter: ....................................0.281" / 0.250" diameter - used with heater only and heater with thermocouple leads, 20 gauge and finer  -  1/2" - used with heater only and heater with thermocouple leads, 18 gauge to 12 gauge

Standard potting adapter length: .......................1.0" - Other lengths available

Standard coil I.D.: .................................................From 3/8" up to 2 1/2" in any increments

Coil I.D. tolerances: .............................................3/8” to3/4”, + 0.000”, - 0.020”  - 7/8” to 1 1/4”, + 0.000”, - 0.030"  -   1 1/2” to 2 1/2”, + 0.000”, - 0.060”

Coil length: ............................................................Up to 12” on 3/8” to 3/4” I.D.  -  Up to 16” on 7/8” to 1 1/4” I.D.  -  Up to 18” on 1 1/2” to 2 1/2” I.D.

Coil length tolerance: ...........................................0 to 6”: + 0, - 1/8”  -  6 to 12”: + 1/8”, - 1/4”  -  12 to 18”: ± 1/4"

Electrical:

Resistance tolerance: ..........................................± 10%

Wattage tolerance: ................................................± 10%

Maximum amperage: ...........................................Size dependent, consult factory

Standard Voltage: .................................................120 or 240 volts, for higher or lower wattages contact Durex Industries

DSCN1364

DSCN1363

DSCN1361

本网站由阿里云提供云计算及安全服务 Powered by CloudDream