What are the new requirements for the design of cast aluminum heating band heaters?
With the advancement and development of science and technology, people's living standards are constantly improving, and their demands for various types are also constantly improving. Therefore, the design of cast aluminum heating band heaters also has new requirements.
(1) Reasonable airflow and temperature rise. The power of the cast aluminum heater is determined by the volume of the air. The ceramic heating band heater and the temperature rise need to meet the volume and temperature of the rising air. Excessive air should not be used. Excessive temperature rise. Due to large air volume and temperature rise, it directly leads to excessive heating power. Increase energy consumption. The air volume is large, and the temperature rise is unnecessary. Comprehensive consideration, reasonable design, determine appropriate parameters.
(2) An insulation layer should be added to the surface of the cast aluminum heating band heater. Most of the devices used for cast aluminum heating only heat the pipe at the outlet of the cast aluminum heater, and the surface of the cast aluminum heater itself does not have any insulated handles. The data shows that, in contrast, the surface energy of the cast aluminum heater increases the insulating layer to reduce the energy consumption by 5%-10%. The long-term operation, the energy-saving ceramic heating band heater consumption is very considerable, the factory should be in an insulating layer, At the same time on the pipeline, the air-cast aluminum heater is installed with an insulation layer.
(3) Reduce the pressure loss of the cast aluminum heating band heater itself. The pressure loss caused by heating air flowing through the inside of the cast aluminum heater. The greater the pressure loss, the greater the energy consumption of the fan, and the structure of the cast aluminum heater itself. The ceramic heating band heater is improved and innovative, and the pressure loss generated is small.
