• FSR panel radiators are ceramic infrared radiators, which are designed for operating temperatures up to 720 °C. Surface ratings of up to 64 kW/m² can be installed.

        FSR series radiators are made using a full-pour casting ceramic process and are characterised by their concave design. Due to the design of this type, there is a space between the radiator and mounting plate, which reduces the heat absorbed by the wiring space.

        FSR panel radiators can be used universally and are suitable for assembling radiation areas with any geometry required. They are available in three designs and cover the power range from 60 W to 1000 W.

        With its FSR panel radiators, the company Laiyuan has been setting design, type, power and quality standards, for ceramic infrared panel radiators.

         

        More size of FSR Panel Radiators :

         

        More Size of FSR Panel Radiators :

        Order parameters of :

      • Characteristics VS Properties :

        These flexible ceramic pad heaters are designed for most preheat and post heat treatment (stress relieving) requirements on weld joined materials. They can be used to construct a simple, inexpensive furnace when combined with the proper insulation as well as in many other applications where a flexible heater is required.

        These flexible ceramic pad heaters are designed for most preheat and post heat treatment (stress relieving) requirements on weld joined materials. They can be used to construct a simple, inexpensive furnace when combined with the proper insulation as well as in many other applications where a flexible heater is required.

        Flexible Heater Type is a pad heater constructed of interlocking sintered alumina ceramic beads which insulate stranded nickel-chrome wire. This durable construction forms a flexible mat of considerable mechanical strength. They can be used up to 2050°F (1121°C) and are supplied with insulated leads with male welder terminations.

        Information

    • FSF panel radiators are ceramic infrared radiators with a low overall height. They are produced using a full-pour casting ceramic process and are designed for operating temperatures up to 720 °C and surface ratings up to 64 kW/m².

      Compared to other Laiyuan panel radiators, which have the standard socket, the overall height of the FSF radiators, measured from the radiation surface up to the mounting plate, has been reduced by approximately 45 %.

      FSF series radiators can be used universally. The low overall height of the radiators enables space-saving installation, for example, which may be required to retrofit machines.

      FSF radiators are available in four designs and cover the power range from 60 W to 1000 W. They  have the customary market dimensions and can there- fore be replaced with radiators with corresponding properties if the requirements change.

    • FSF panel radiators are ceramic infrared radiators with a low overall height. They are produced using a full-pour casting ceramic process and are designed for operating temperatures up to 720 °C and surface ratings up to 64 kW/m².

      Compared to other Laiyuan panel radiators, which have the standard socket, the overall height of the FSF radiators, measured from the radiation surface up to the mounting plate, has been reduced by approximately 45 %.

      FSF series radiators can be used universally. The low overall height of the radiators enables space-saving installation, for example, which may be required to retrofit machines.

      FSF radiators are available in four designs and cover the power range from 60 W to 1000 W. They  have the customary market dimensions and can there- fore be replaced with radiators with corresponding properties if the requirements change.

    • HFS panel radiators are ceramic infrared radiators, which are designed for medium surface ratings up to 38.4 kW/m² and operating temperatures up to 630 °C.

      HFS series radiators are made using a hollow casting ceramic process. Compared to ceramic IR radiators produced using the full-pour casting process, HFS radiators have a considerably shorter heating-up time.

      This technique was successfully used first for HFS radiators and then further developed for subsequent models.

      HFS panel radiators are available in four designs and cover the power range from 60 W to 600 W.

      HFS panel radiators have customary market dimensions and can therefore be replaced with  radiators with the relevant properties if the requirements change.

      More size of HFS Panel Radiators :

  • Tubothal Heating Element

    The Tubothal heating elements we supply are designed for long life and maintenance free operation. The so-called cartridge heaters are available in standard diameters of 50-214mm. The elements can be provided in almost any length.

    Depending on the desired capacity and the available space in your oven, the diameter and length determined. The Tubothal elements can be mounted horizontally (placed in a radiant tube) and vertically.

    Because of the ingenious design, Tubothal heating elements deliver a much higher power per meter (up to 45kW) than conventional cartridge heaters.

    Well-defined combustion is important to maximize efficiency and reduce pollution. Too much air reduces the heat output and increase the amount of harmful nitrogen oxides (NOx) in the exhaust gases. Too little air results in imperfect combustion which causes unburnt residues in the form of carbon monoxide (CO) and hydrocarbons (CxHy) to be expelled with fumes to the environment. Control equipment ensures that combustion always remains within the "green window" resulting in low emissions of both nitrogen oxides and carbon monoxide.

     

  • Bobbin heater is constructed using several refractory ceramic blocks assembled together to the required length. The Nichrome wire heating element is inserted into the ceramic blocks, with a terminal block at one end.

    This bobbin  assembly is then inserted into  a pre-assembled special protection tube, when used in liquid immersion and gas application.  However,  bobbin heaters can also be used in direct air-heating application without the protection tube.

    All ceramic bobbin heaters are custom-made, and the power ratings are according to the length of the ceramic bobbins shown in the table below .High-grade mildsteel or stainless steel protection sheath available to suit the customers’ various .

     

    Offers a large area to heat liquids or semi-solid materials like wax, fats, oil and bitumen.

    Suitable for indirect heating of gases and liquids, where it is inserted into a pocket or protection tube in the process tank, wherein, it can be repaired or replaced without draining the process tank.

    Wide range of lengths, voltages and power is available to meet customers’ specific requirement.

    Benefit Simple and low-cost installation,Ease of maintenance and repair,Energy efficient as 100% of heat generated is within the solution.

    Specification Of Ceramic Bobbin Heater:

    Features of Ceramic bobbin heater

    Product Description :

    Industrial Application of Ceramic bobbin heater:

    1. Pre-heating bitumen road pavement

    2. Oil purification industry

    3. Degreasing for metal stamping industry

    4. Wax softener

  • 1. The ceramic heating soaks is one kind of infrared sources,has one kind of similar natural sunlight heat radiation.

    2. The radiator produces the long wave infrared heat radiaton can effectively the warm reptilia animal.

    3. Has promoted in the rearing tray temperature.

    4. Infrared hot may penetrate the skin organization,expands the blood vessel,the promotion blood circulation,the enhancement health and accelerates to be restored to health.

    5. Can provide the quantity for heat for reptile,provides the heat source is nonluminous,the service is 10000 hours.

    6. Solid cerammic element,suitable for wet environment.

        Specifications: 100-220 V, 50W~350W
        Color:Black/Yellow/White

        Screw: E27

    Size Information of Pet Heating Light Bulb:

    Pet Heating Light Bulb

  • Ceramic Heater for Air Welding Gun

    Main Features of Ceramic Heater:

    1. Quick raising temperature and heating speed

    2. No bright, anti-oxidation, corrosion resistant, acid-proof

    3. Small volume and high insulation property

    4. High heating efficiency and long use-life

    5. Ceramic material can resist 1400 degree C

    6. Swedish Brand Heating Wire

    7. With CE certificate

    8. Pin Pure copper plating with spring, fix firmly

    9. Voltage, power and size can be customized

    Main Application of Ceramic Heater:

    It is widely used in air blower, warm air direr, dry line machine, plastic welding gun, line blower, shoes machine , canister blower etc kinds of air heating device, and medicine, leather, shoes making, hand snack, chemical industry etc.

    Notes when use Ceramic Heater :

    1.Check power voltage before installation

    2.Check whether the outlet is blocked

    3.Avoid working overtime

    4.Check the screw regularly for the oxidation looseness

    DSC_0576
    DSC_0576
    DSC_0569
    DSC_0569

    More models of Diameter 16.5mm,26mm,31.5mm,44mm,55.5mm,85mm, Ceramic Heater :

本网站由阿里云提供云计算及安全服务 Powered by CloudDream