Industry Heaters
Thermal Oil Furnace
Our electric heat conduction oil furnace is equipped with a perfect operating control and safety monitoring device, so it can realize Automation Control
it can reach a higher operating temperature under lower operating pressure
High Thermal efficiency, can reach to higher than 95%,the control precision can be +/-1 °c
The equipment is of small volume, flexibly to install, adapt to install nearby the heat using equipmen
Model Number: WDR Series
Output: electrical
Dimension(L*W*H): As Model
Weight: As Model
Certification: ISO
Media: Organic Heat Transfer Material
Heat Carrier: Conduction Oil/Thermal Oil
Heat Efficiency: >90%
Highest Operation Temperature: 300
Structure: Oil Tube
Pressure: Low Pressure
Style: Vertical
Fuel: Electric
Product name: Thermal Oil Furnace
Output: Hot Oil
Dimension(L*W*H): designed as customer's request
Material: SS304
Shap: Cabinet type
Warranty: 12 month
Voltage: 380V/415V/440V/450V
Power(W): 400 KW
Product Type: Heat Conduction oil furnace
Structure: electrical
Pressure: Low Pressure
Style: Vertical
Fuel: Oil based,Coal Based, etc
Place of Origin: Shandong, China (Mainland)
Electrical Heating Conduction Oil Furnace adopts a digital display temperature controller, and has functions of over temperature alarm, low oil level alarm and over pressure alarm. This product is a type of high-efficiency energy-saving heating equipment for chemical, petroleum, machinery, printing and dyeing, foodstuff, marine, textile, and film industry,etc.
Serial Thermal oil heater is a kind of new-typed heating equipment with heat energy conversion. It takes the electricity as power, changes it into the heat energy through the electrical organs, takes the organic carrier ( heat Thermal oil ) as medium, and continues to heat through the compulsive circulation of the heat Thermal oil driven by high-temperature oil pump, so as to meet the heating requirements of users. In addition, it could also satisfy the requirements of set temperature and temperature controlling accuracy.
Electrical Heating Conduction Oil Furnace is a special type industrial furnace, characterized by safety, high efficiency, saving energy, low pressure and functions of supplying high temperature heat energy. The electric oil heating furnace is a special type straight flow industrial furnace, which adopts electricity as the heat source, and uses the heat transfer oil as the heat carrier.
Electrical heat-conducting oil furnace system is composed of an explosion-proof electric heater, an organic heat carrier furnace, a heat exchanger (configurable), a control cabinet, a hot oil pump, and an expansion slot. The user only needs to connect the equipment to a power supply, and arrange medium inlet and outlet pipes and electrical interfaces before use. electrical heat conduction oil furnace (also known as oil transfer heater), the electric heater is directly inserted into the organic carrier (heat transfer oil) for direct heating
The main frame is made of steel, bear strong weight;
The heat preservation device is perfect and thermal efficiency is improved;
Oil return temperature can be displayed;
Switching function of heating power and it can be customized;
The temperature can be adjusted freely at RT- 300 °C;
Automatic exhaust when starting up;
Delay cooling when shutting down,and it can be customized;
Multipoint temperature control and it can be customized;
Pressure detection and alarm;
Temperature detection and alarm;
Our heater are with explosion-proof, they can be OEM.
(1) heater start and stop control
(2) signal display of heater start and stop
(3) display and control of outlet temperature
(4) three phase current and voltage display
(5) system power indication and fault alarm indication
(6) fault interlock and electric automatic protection
It’s common to install air ducts on the roof of industrial and commercial areas and buildings. Those primary uses for air ducts are the following: central air heating, ventilation and air conditioning. For a large building or structure, supplement heating is necessary to deliver the air at appropriate quality and temperature.
Duct heaters are ideal to warm low-pressure air flow via convection heating. For cold and humid environments, the air flowing temperature of the duct will gradually decrease across the duct wall. For this case, an air duct heater would be useful to supply the required heat in order to warm the building. A duct heater’s simple design and installation is the main feature for this product.
In addition, duct heaters have a large variety of application; for example, comfort heating, humidity control, freeze protection, heat treating, air pre-heating, etc. For large buildings and houses application, the primary use of air duct heaters is air ventilation system and comfort heating. A unit heater or a ceramic heater can be installed during or after the new building construction since this type of air heater can be easily removed and installed
4.High temperature, for application in ovens and stoves.
Minimal air speed: 1.55m/s
Maximum air temperature: 650ºC
1.Assembly in conduits of air conditioning.
Minimal air speed: 1.5m/s
Maximum air temperature: 60ºC
Model Number: Air Series
Output: electrical
Dimension(L*W*H): As Model
Weight: As Model
Certification: ISO
Media: Air
Heat Efficiency: ≥95%
Highest Operation Temperature: 800
Structure: Seamless Stainless Steel fins Tube
Pressure: Low Pressure
Style: Vertical
Fuel: Electric
Product name: Air Duct Heater
Product Type: Hot Air Electric Heater
Output: Hot Air
Dimension(L*W*H): designed as customer's request
Material: Carbon Steel Spray/SS304
Shap: Cabinet type
Warranty: 12 month
Power(W): 3KW-1000 KW
Voltage: 380V/415V/440V/450V
Place of Origin: Yancheng, China
Packaging: Wooden case
Port of Origin: Shanghai, China
2.Air handling unit.
Minimal air speed: 1.5m/s
Maximum air temperature: 80ºC
3.Air heating in industrial process, stoves, ovens, heating premises, etc. 2.5m/s 200ºC
Minimal air speed: 2.5m/s
Maximum air temperature: 200ºC
4.High temperature, for application in ovens and stoves.
Minimal air speed: 1.55m/s
Maximum air temperature: 650ºC
Devices for air warming in conduits of forced air, ovens, stoves and many other appliances for the industry and the air conditioning sector. Made with rectangular or spiral fin elements. The air duct heaters are classified according to its application:
Air Duct Heater
The main frame is made of steel, bear strong weight;
The heat preservation device is perfect and thermal efficiency is improved;
Oil return temperature can be displayed;
Switching function of heating power and it can be customized;
The temperature can be adjusted freely at RT- 300 °C;
Automatic exhaust when starting up;
Delay cooling when shutting down,and it can be customized;
Multipoint temperature control and it can be customized;
Pressure detection and alarm;
Temperature detection and alarm;
Our heater are with explosion-proof, they can be OEM.
(1) heater start and stop control
(2) signal display of heater start and stop
(3) display and control of outlet temperature
(4) three phase current and voltage display
(5) system power indication and fault alarm indication
(6) fault interlock and electric automatic protection
An pipeline heater is composed of an immersion heater covered by an anti-corrosion metallic vessel chamber. This casing is mainly used for insulation to prevent heat loss in the circulation system. Heat loss is not only inefficient in terms of energy usage but it would also cause unnecessary operation expenses. A pump unit is used to transport the inlet fluid into the circulation system. The fluid is then circulated and reheated in a closed loop circuit around the immersion heater continuously until the desired temperature is reached. The heating medium will then flow out of the outlet nozzle at a fixed flow rate determined by the temperature control mechanism.
Pipeline Heater
Model Number: Water/Gas/Oil Series
Output: electrical
Dimension(L*W*H): As Model
Weight: As Model
Certification: ISO
Media: Air
Heat Efficiency: ≥95%
Highest Operation Temperature: 800
Structure: Seamless Stainless Steel Tube
Pressure: Low Pressure
Style: Horizontal/Vertical
Fuel: Electric
Product name: Pipeline Heater
Product Type: Electric Heater
Output: Hot Water/Gas/Oil
Dimension(L*W*H): designed as customer's request
Material: Carbon Steel Spray/SS304
Shap: Cabinet type
Warranty: 12 month
Power(W): 3KW-1000 KW
Voltage: 380V/415V/440V/450V
Place of Origin: Yancheng, China
Packaging: Wooden case
Port of Origin: Shanghai, China
When pipeline heater through electricity will appear self-heating effect, causing the solvent or water molecules in the pipeline heater to evaporate. The heat generation of the heater is uniform, thereby avoiding the deformation and qualitative change of the pipe heater due to the degree of thermal expansion, so that the material appearance, physical and mechanical properties, fastness and color of the pipe heater are kept intact.
Pipeline heaters are widely used in automotive, textile, printing and dyeing, dyes, paper, bicycle, refrigerator, washing machine, chemical fiber, ceramics, electrostatic spraying, food, food, pharmaceutical, chemical, tobacco and other industries to achieve ultra-fast drying of pipeline heaters. purpose. The pipeline heater has good radiation effect, the pipeline heater has obvious power saving, and the advantages of use and maintenance are convenient. The heating of the pipeline heater is also particularly suitable for the large-scale drying room, oven and water drying tunnel of leather machinery.
Pipeline heater connected by flange convenient for disassemble and maintain
Heating uniform and high efficiency, can reach to higher than 95%, the control precision can be +/-1 °c
High mechanical strength and advanced structure can guarantee running safety
Equipped with PID automatic electric control panel to guarantee outlet temperature,according outlet temperature to adjust heating power to arrive energy and power saving to keep low running cost
Switching function of heating power and it can be customized;
The temperature can be adjusted freely at RT- 800 °C;
Automatic exhaust when starting up;
Delay cooling when shutting down,and it can be customized;
Multipoint temperature control and it can be customized;
Pressure detection and alarm;
Temperature detection and alarm;
Our heater are with explosion-proof, they can be OEM.
PID control panel functions:
(1) heater start and stop control
(2) signal display of heater start and stop
(3) display and control of outlet temperature
(4) three phase current and voltage display
(5) system power indication and fault alarm indication
(6) fault interlock and electric automatic protection
Duct heaters are mainly used for heating air through the duct. There are three types,
low temperature, middle temperature and high temperature. The outer stainless steel sheath and construction can reduce the vibration of heating elements. There is a overheat protector in the terminal box. Air pressure through the duct should not exceed 0.3KG/cm². Or else it is better use recirculation duct heaters.Maxtemperature of low temperature duct heater is not more than 160 C. Max temperature of middle temperature duct heater is not more than 260 C. Max temperature of high temperature duct heater is not more than 850 C.
1. During heating,air max temperature can reach 850 degree celsius,but the surface temperature of the sheath is just around 50 degree Celsius.
2. Heat efficient is more than 95%
3. Temperature raise rate:10 degree Celsius per second during working
4. The heating element is made of high temperature alloy with good mechanical character
5. Usage time:standard more than 10 years
6. Clean air,small volume
7. Made as client design,2KW~1000KW
8. After reached the max temperature,the working wattages can reduce to half.
It has been applied extensively in aerospace industry, weapon industry, chemical industry, and research and manufacturing laboratories in institutions of higher education, etc.
Hot Air Heater
Electric mixing and heating tank is consisted of tank body, mixing part, heating part and electric control panel. The tank made up of stainless steel with jacket for heating or cooling and insulating layer for outer. There are many options for choosing the type of Jacketed heating, such as electric heating steam heating, oil heating.
According to technological requirements, the mixing part can choose high shear, high speed dispersion or low speed or mixing,paddle mixing, propeller mixing and so on.
Reactor is typically used to install floor mounted legs,also can use lug support on the platform.
1.Used as liquid storage tank, liquid composing tank, temporary storage tank and water storage tank etc.
2.Electric mixing and heating tank used in fields such as foods, dairy products, fruit juice beverages, pharmacy, chemical industry and biological engineering etc.
1. Mixing and heating uniformly to prove product quality.
2. Operating conveniently saving working time.
3. By dynamic balance testing to improve working safety.
4. No nosy to improve working environment.
5. Materials are all sanitary stainless steel.
6. Humanized structure design and easy to operate.
7. Transition area of interior wall on tank adopts arc for transition to ensure no dead comer of sanitation.
Chemical Tank
Configuration of tank
Chemical Tank
From the indide out: inner chamber(stainless steel)→ heating element(S.S304 finned tube)→insulating layer(aluminum silicate wool)→outermost shell(carbon steel/stainless steel)
1.With hot air circulation drying oven:
With electrical machine
Temperature uniformity
Below 500℃
2.Without hot air circulation drying oven: With exhaust funnel
Temperature nonuniformity
Below 100℃
The air circulating oven is a versatile drying equipment,it is suitable for heating,soliding and drying material and product in the field of pharmaceutics,chemical,foodstuff,light industry such as:raw material medicine,Chinese traditional medicine,power granule,crude drug,packing bottle,pigment,dyestuff,dehydration vegetable,foodstuff,plastic resin,Electrical component,coat,wool,salt,catalyzer etc.
Yancheng Laiyuan Electric Equipment Co., Ltd. 苏ICP备15027822号 Copyright © 2017, china-laiyuan.com Inc. All Rights Reserved
Pre-sales Advisory Hotline
+86-15851048592
Professional technical consultation
Comprehensive product interpretation
Customer case sharing
Wechat/ Hotline：
